WallTop computers... the concept is to recycle an old laptop by removing all the extraneous parts such as the cdrom drive, floppy drive, (dead) battery and then hanging it on the wall.

Available hardware

My first attempt is based on a Dell Inspiron 3700 C466GT.

466 MHz Celeron processor
256 MB PC100 SODIMM memory
one PATA slot
two broken PC card slots
one USB port

Removed: case, 4200 RPM hard drive, dead battery

Added: a shadow box frame from Michaels, a power supply from OSUsed, a CF to 44pin PATA adapter, a 1GB CF card, and an ASUS 802.11g WiFi USB adapter

I had to modify the frame to add cooling slots.

This laptop will only boot when you touch its power on button. To make the button accessible I mounted the motherboard upside down (what used to be the top is towards the wall when it's hanging up. I drilled a hole in the back about 3/8" diameter. You can poke the button with a pencil eraser to boot it up. Yes.. its a pain.

More hardware available for future projects

Micron TransPort GX2: Pentium III 1.2Ghz

15-inch LCD at 1,280-by-1,024

http://www.pcmag.com/article2/0,2817,7733,00.asp

Micron TransPort XT Notebook Computers CPU: Intel Pentium III 750 ~ 850MHz

Standard Memory: 64MB~256MB
Maximum Memory: 512MB

14" screen

http://www.pcworld.com/article/54784/micronpc_launches_transport_xt_notebook.html

The software

Which distribution to use?

After much research and experimentation I settled on Debian Live!

This allows me to build an image on a big fancy Ubuntu desktop system (Raven) and test it in qemu.

Once the image is built I transfer it to a Compact Flash card, which will be plugged into an IDE adapter and replace the incredibly noisy stock 4200 rpm hard drive.

I am also now using Debian Live! to build Asterisk phone systems.

Some other options that I investigated:

Debian
Damn Small Linux
Puppy Linux (which immediately panics on boot)
Movix
Ubuntu, building a custom Live CD

Debian Live! installation

Debian Live wiki

Building an USB/HDD image

FluxBox

Install the tools to build Debian Live! systems

apt-get install live-helper

Build an image.

lh_clean --binary
lh_config -b usb-hdd -k 686 --bootstrap-flavour minimal\
--packages-lists "stripped" --binary-indices disabled\
--memtest "disabled"\
--packages "x-window-system-core fluxbox\
openssh-server vlc gnash portmap nfs-common\
autofs debconf-english"\
--bootappend-live "nolocales" --syslinux-timeout 50

I build on a 64 bit machine so I have to say -k 686 to get the 32 bit kernel

Add scripts to config/chroot_local-hooks

02-fix_inittab.sh - changes runlevel to 5 and adds the tty7 login line so I have only one login running instead of default 5

40-bash_profile.sh - append or create a .bash_profile script that will run a script from nfs and then do a 'startx'.

50-windowmanager.sh - configures fluxbox startup files

99-make-export.sh - make the directories needed for autofs

Add files to config/chroot_local-includes I add the autofs.* files that I use to mount nfs servers.

Doing customizations, do this (as root)

lh_clean --binary
lh_config
lh_bootstrap
# Prepare for a chroot system so you can do hacks
lh_chroot
lh_chroot_hosts install
lh_chroot_resolv install
lh_chroot_proc install
chroot chroot
#do the hacks here, for example "apt-get install asterisk".
exit
# Now remove the changes make to do chroot
lh_chroot_hosts remove
lh_chroot_resolv remove
lh_chroot_proc remove
# I wonder what this does
lh_binary
# Build the image
lh_build

Copy image to CF: dd if=binary.img of=${USBSTICK}

To test image, start in qemu or convert img file to a vmdk and use vmware

To use in walltop, transfer CF to laptop and boot it

Customization that I might want to do

other codecs???
emacs21-nox
libcurl3
realplayer?
firefox - use iceweasel, unless like me your laptop is puny, then forget it!
flash - use gnash??

I need something to do a slide show of pictures, driven from command line. Image-magick supports this.

Starting X / fluxbox without a window manager http://www.debianadmin.com/how-to-auto-login-and-startx-without-a-display-manager-in-debian.html

Building a working image

To make (large) changes, you build a new, complete image from scratch. You copy the new image to CF, put it in the computer, and boot.

I add scripts to config/chroot_local-hooks. I keep backup copies of the scripts at the top level so that I can wipe the config/ directory and rebuild it from scratch. I keep copies of the files that will be included in MyConfigIncludes/

Create scripts to customize the images

nn-name.sh where 'nn' is a number to control execution order, and 'name' is a meaningful name, for example 01-password.sh would be used to install local user accounts and set user and root passwords.

Networking

Depending on how I deploy things, wired or wifi might be easier. From my notes below I have concluded wired is easier!

Wired network

I ended up pulling a USB-to-ethernet adapter out of my junkbox. It's a 3COM 3C19250 from a 3COM Audrey. I hooked it up to my VirtualBox simulated walltop and it started right up. Now I have to do the DHCP set up in Debian Live and see if it works on the Dell hardware.

WiFi Network

These are WiFi cards I was considering using. They are still in my junk box but when I actually went to plug one in, I found that this Dell's PC card slots are messed up, so instead I plugged in an ASUS USB adapter.

D-Link DW650M http://sourceforge.net/apps/mediawiki/ndiswrapper/index.php?title=D-Link_DWL-G650M

Microsoft MN-720

I have not completed testing of ndiswrapper since I switched to using the ASUS USB adapter. Here are my notes for the NEXT walltop. I have several more laptops...

To use these I need to use the manufacturer's drivers + ndiswrapper. http://wiki.debian.org/NdisWrapper

In chroot environment

m-a prepare
m-a a-i ndiswrapper
echo ndiswrapper >> /etc/modules

WiFi Security settings

With this device it's just a matter of plugging it in and then getting the correct security settings for the network. I was able to turn off security on my Linksys and get a connection. Since my ultimate goal is to take this to work and hang it on the wall there, turning security at the WAP off is not an option.

I first I spent a couple hours wrestling with getting it to work with wpa_supplicant on an Ubuntu desktop. I tried all sorts of combinations of security settings to no avail. Very frustrating.

Then I found wicd. I installed it (apt-get install wicd), started the daemon (sudo wicd) and the client (wicd-client -n) and had a link up in about 60 seconds. Conclusion: USE WICD!!

What I actually ended up doing was installing wicd, using it to set up wpa_supplicant, and then removing it from my installation. The wpa_supplicant configuration that worked that I created with wicd-curses looks like this

ap_scan=1
ctrl_interface=/var/run/wpa_supplicant
network={
      ssid="wildsong"
      scan_ssid=0
      proto=WPA RSN
      key_mgmt=WPA-PSK
      pairwise=CCMP TKIP
      group=CCMP TKIP
      psk=67c4e0a7ff7736641fdf9bc8094c45a8b7c60a33f45321f6c3d08f42ec0397af
}

Check the downloads page for more documentation

In Debian Lenny, wicd is a backport, so installing it requires additional work. Add this to /etc/apt/sources.list; like this

echo 'deb http://www.backports.org/debian lenny-backports main contrib non-free ' > config/chroot_sources/backports-wicd.chroot
wget -O - http://backports.org/debian/archive.key -O config/chroot_sources/backports-wicd.binary.gpg

NOTE Backports is also required for the USB firmware

Then in the chroot environment I do this

apt-get update
apt-get install debian-backports-keyring
apt-get -t lenny-backports install wicd

...which installs about a zillion more dependent packages! All just to get my wireless link going!

SSH services

The lsh-server is a small SSH server.

By default it generates keys on the first run, which alas is every time on a Debian Live system. So I generate keys on the development host and copy them into the config tree.

This is how I generate the seed file and keys.

mkdir ~/.lsh && cd ~/.lsh
lsh-make-seed --sloppy -o yarrow-seed-file
lsh-keygen | lsh-writekey

Testing

To test the image in a virtual machine, you can either start it directly in qemu or convert the img file to a vdi and use VirtualBox

I really don't like using Qemu so I deleted the instructions that I used to have here. I don't intend to use it again.

Converting the IMG file to a VDI file

VBoxManage convertfromraw -format VDI binary.img binary.vdi

Now you can create a virtual machien and mount the VDI as a virtual disk and boot from it. It boots about 10 times faster on the development system as on the real computer. Poor little obsolete laptop!

You can also the virtual machine to boot from the USB stick but testing the img file first means you don't have to keep copying the image to the stick.)

Deployment

Copy the image to a CF card, completely overwriting it: dd if=binary.img of=<devicename>. You can get the device name with dmesg, it will be buried in the last few messages after you insert the stick. Something like /dev/sda. Don't use the first partition (which would be /dev/sda1), use the whole drive, you have to overwrite everything there including the boot block and the partition table.

Note: If you select the wrong device name you can make the host system unbootable in about 250 mS. If you do this, don't come whining to me about it. Fix it.

Walltop

Contents