View source for Vilo

Here we go, trying to adapt to a new access point, a Vilo 6.

It does 802.11AX to allow a GB connection for [[Pearl]].

== Setup notes ==

It's in BRIDGE mode.

Also I did the thing that splits it into two SSID's "wildsong" is 5 GHz and "wildsong2" is 2.4.
This is specifically to support our Tuya-based switches and dimmers, they are unhappy on combined networks according to their docs.

=== IPV6 DNS glitch ===

[[Pearl]] was getting an IPv6 DNS server setting from the Vilo 6.

That meant Pearl was no longer paying attention to PiHole since it preferred the Vilo.
Access to the Internet was fine but it did not resolve my local IP addresses.

The fix I came up with is to disable DNS over IPV6 by doing this

 reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters" /v DisabledComponents /t REG_DWORD /d 255 /f

If I have to use another Windows machine on WiFi here I will deal with it.

[[Category:Network]]