VOIP: Difference between revisions

From Wildsong
Jump to navigationJump to search
← Older edit
VisualWikitext
Brian Wilson (talk | contribs)
Bureaucrats, restrict, Administrators, uploaders
11,540 edits
Brian Wilson (talk | contribs)
Bureaucrats, restrict, Administrators, uploaders
11,540 edits
 
(2 intermediate revisions by the same user not shown)
Line 2: Line 2:


* A small Supermicro server ([[Bellman]]) runs Asterisk on Debian
* A small Supermicro server ([[Bellman]]) runs Asterisk on Debian
* A Grandstream GXV3240 Android deskphone is the main office phone
* 2 Grandstream GXV3240 Android deskphones are the main office and workshop phones.
* A Linksys SPA2000 directs calls to a Western Electric model 2500 in the kitchen and a generic analog phone in the studio, they share the same line.
* A Linksys SPA2000 directs calls to a Model 500 rotary dial phone in the studio.
* Elastic SIP Trunking service is provided by Twilio
* Elastic SIP Trunking service is provided by Twilio
* Inbound calls are directed to an extension that rings the SPA2000 phones, the GXV3240, and sends the call back out to my cellphone via Twilio.
* Inbound calls are directed to an extension that rings the SPA2000 phone, the GXV3240s, and sends the call back out to my cellphone via Twilio.
* SMS messages come to Twilio and gets forwarded to my cellphone via a TWMLBIN rule (Programmable SMS).
* SMS messages come to Twilio and gets forwarded to my cellphone via a TWMLBIN rule (Programmable SMS).
* The Asterisk PBX handles voicemail.
* The Asterisk PBX handles voicemail.


We still have a GoogleVoice number that forwards calls to the Twilio number and to Julie's cellphone. I am relying on the Asterisk
We still have a GoogleVoice number that forwards calls to the Twilio number and to Julie's cellphone. I am relying on the Asterisk forwarding to get GoogleVoice calls on my cellphone.
forwarding to get GoogleVoice calls on my cellphone.


== Hardware ==
== Hardware ==
Line 16: Line 15:
=== PSTN gateways ===
=== PSTN gateways ===


Are you still using POTS lines? Really? Get rid of them and use Twilio.
If you must use POTS lines for some reason (no Internet available?) then my current recommendation would be a Sangoma Vega 50. It works flawlessly and reasonably easy to set up and configure.
I have also used Digium boards. The X100P is cheap but supports only one line. The TDM400 is good for 4 lines.
I worked with a Grandstream GXV4104 and found it to be possible to make it work but really a pain to configure.
Long ago
I tried out a [http://www.linksys.com Linksys SPA-400] with 3 PSTN analog phone lines and an Asterisk server running on a recycled PC. It probably works fine as intended, in an all Linksys system but I was never able to get it to work reliably with Asterisk. The irony is that the SPA-400 runs Linux and Asterisk internally.
I tried out a [http://www.linksys.com Linksys SPA-400] with 3 PSTN analog phone lines and an Asterisk server running on a recycled PC. It probably works fine as intended, in an all Linksys system but I was never able to get it to work reliably with Asterisk. The irony is that the SPA-400 runs Linux and Asterisk internally.


Line 35: Line 43:


After a few months of wrestling with it, we bought a TDM-400 and sold the SPA-400 on eBay.
After a few months of wrestling with it, we bought a TDM-400 and sold the SPA-400 on eBay.
=== Digium X100P ===
These are fine if you only need one line, cheap on ebay.
=== Digium TDM400 ===
This is the card I am working with now. It's great.
=== Sipura SPA3000 ===
I'd like to try one of these as a single line solution.
==== Sipura SPA3102====
I have a SPA3102 now that I picked up for the [[Chintimini Wireless Project]].


=== Handsets ===
=== Handsets ===
Line 151: Line 143:


Freeswitch -- http://www.freeswitch.org/
Freeswitch -- http://www.freeswitch.org/
I am testing a set up on [[8track]]
Kirk Bailey is experimenting with pfSense (http://pfSense.com/) which is a FreeBSD based firewall project. It is intended for embedded systems such as the Soekris. pfSense has a package management system and there is now a FreeSwitch package. I am going for a file server based solution right now so this is on hold for me.


== Asterisk ==
== Asterisk ==

Latest revision as of 02:54, 18 October 2018

Wildsong's phone system overview

  • A small Supermicro server (Bellman) runs Asterisk on Debian
  • 2 Grandstream GXV3240 Android deskphones are the main office and workshop phones.
  • A Linksys SPA2000 directs calls to a Model 500 rotary dial phone in the studio.
  • Elastic SIP Trunking service is provided by Twilio
  • Inbound calls are directed to an extension that rings the SPA2000 phone, the GXV3240s, and sends the call back out to my cellphone via Twilio.
  • SMS messages come to Twilio and gets forwarded to my cellphone via a TWMLBIN rule (Programmable SMS).
  • The Asterisk PBX handles voicemail.

We still have a GoogleVoice number that forwards calls to the Twilio number and to Julie's cellphone. I am relying on the Asterisk forwarding to get GoogleVoice calls on my cellphone.

Hardware

PSTN gateways

Are you still using POTS lines? Really? Get rid of them and use Twilio.

If you must use POTS lines for some reason (no Internet available?) then my current recommendation would be a Sangoma Vega 50. It works flawlessly and reasonably easy to set up and configure.

I have also used Digium boards. The X100P is cheap but supports only one line. The TDM400 is good for 4 lines.

I worked with a Grandstream GXV4104 and found it to be possible to make it work but really a pain to configure.

Long ago I tried out a Linksys SPA-400 with 3 PSTN analog phone lines and an Asterisk server running on a recycled PC. It probably works fine as intended, in an all Linksys system but I was never able to get it to work reliably with Asterisk. The irony is that the SPA-400 runs Linux and Asterisk internally.

You can download the source tarball from the Linksys site.

version 1.0.0.2

It's based on Monta Vista Hardhat Linux

  • MIPS processor
  • ?? Flash
  • ?? RAM
  • Linux 2.4 kernel
  • Busybox
  • Asterisk PBX software
  • thttpd
  • /usr/sbin/lightbox controls LED's
  • dropbear ssh

After a few months of wrestling with it, we bought a TDM-400 and sold the SPA-400 on eBay.

Handsets

Ones that I have tried include

Grandstream GXV3240 (my favorite), GXV3275, DP715

Grandstream BT-100 -- cheapie

Linksys/Sipura SPA-841

Linksys SPA-941

Polycom IP-550

Polycom IP-650

What has paging / auto-answer / intercom support??? [1] The GXV324xx phones do, I have tested it and it works fine.

Some phones support multicast. incl Grandstream, Aastra, Snom, Linksys

Aastra -- The ALERT_INFO variable works for 480i, 480i CT, 9133i, 9112i firmware 1.2.x or later [2] The bugs listed for this phone seem to preclude its desirability. It's been replaced by the 9480i which is TOO EXPENSIVE

Linksys SPA-841

Snom 300 supports POE and auto answer and multicast paging http://www.snom.com/en/products/ip-phones/snom-300-ip-phone/

Network

Setting up QOS on Mikrotik

Refer to http://wiki.mikrotik.com/wiki/Voip 

/ip firewall mangle
  1. First mark things as SIP
add action=mark-packet new-packet-mark=SIP_IN  chain=prerouting  in-interface=ether1-gateway  disabled=no passthrough=no \
    src-address=192.168.1.2 comment="Bellman"
add action=mark-packet new-packet-mark=SIP_OUT chain=postrouting out-interface=ether1-gateway disabled=no passthrough=no \
    dst-address=192.168.1.2 comment="Bellman"

add action=mark-packet new-packet-mark=SIP_IN  chain=prerouting  in-interface=ether1-gateway  disabled=no passthrough=no \
    src-address=192.168.1.43 comment="GXV3240"
add action=mark-packet new-packet-mark=SIP_OUT chain=postrouting out-interface=ether1-gateway disabled=no passthrough=no \
    dst-address=192.168.1.43 comment="GXV3240"

add action=mark-packet new-packet-mark=SIP_IN  chain=prerouting  in-interface=ether1-gateway  disabled=no passthrough=no \
    src-address=192.168.1.45 comment="SPA2000"
add action=mark-packet new-packet-mark=SIP_OUT chain=postrouting out-interface=ether1-gateway disabled=no passthrough=no \
    dst-address=192.168.1.45 comment="SPA2000"

add action=mark-packet new-packet-mark=ELSE_IN  chain=prerouting  in-interface=ether1-gateway  disabled=no passthrough=no \
    src-address=!192.168.1.2 comment="All Else"

add action=mark-packet new-packet-mark=ELSE_OUT chain=postrouting out-interface=ether1-gateway disabled=no passthrough=no \
    dst-address=!192.168.1.2 comment="All Else"

add action=mark-packet new-packet-mark=ELSE_IN  chain=prerouting  in-interface=ether1-gateway disabled=no passthrough=yes \
    src-address=192.168.1.2 src-port=80 protocol=tcp comment="Bellman Web Server" 

add action=mark-packet new-packet-mark=ELSE_OUT chain=postrouting out-interface=ether1-gateway disabled=no passthrough=yes \
    dst-address=192.168.1.2 dst-port=80 protocol=tcp comment="Bellman Web Server"

iptables -A twilio_whitelist -j ACCEPT -s 54.172.60.0/30 iptables -A twilio_whitelist -j ACCEPT -s 54.244.51.0/30 iptables -A twilio_whitelist -j ACCEPT -s 54.171.127.192 iptables -A twilio_whitelist -j ACCEPT -s 54.171.127.193 iptables -A twilio_whitelist -j ACCEPT -s 54.171.127.194 iptables -A twilio_whitelist -j ACCEPT -s 54.65.63.192 iptables -A twilio_whitelist -j ACCEPT -s 54.65.63.193 iptables -A twilio_whitelist -j ACCEPT -s 54.65.63.194 iptables -A twilio_whitelist -j ACCEPT -s 54.169.127.128 iptables -A twilio_whitelist -j ACCEPT -s 54.169.127.129 iptables -A twilio_whitelist -j ACCEPT -s 54.169.127.130 iptables -A twilio_whitelist -j ACCEPT -s 54.252.254.64 iptables -A twilio_whitelist -j ACCEPT -s 54.252.254.65 iptables -A twilio_whitelist -j ACCEPT -s 54.252.254.66 iptables -A twilio_whitelist -j ACCEPT -s 177.71.206.192 iptables -A twilio_whitelist -j ACCEPT -s 177.71.206.193 iptables -A twilio_whitelist -j ACCEPT -s 177.71.206.194 

/queue tree
add name="IN" parent=global-in priority=1
add name="OUT" parent=global-out priority=1
add name="SIP_IN" packet-mark=SIP_IN parent=IN priority=2
add name="SIP_OUT" packet-mark=SIP_OUT parent=OUT priority=2
add name="ALL_ELSE_IN" packet-mark=ELSE_IN parent=IN priority=8
add name="ALL_ELSE_OUT" packet-mark=ELSE_OUT parent=OUT priority=8

Software

Asterisk -- works well but pretty complicated for small installations. I have some set up notes here Asterisk.

Freeswitch -- http://www.freeswitch.org/

Asterisk

You might want to use an IDE/CF adapter that can hold two CF cards. This way you could stick in a smaller second card -say- 32 or 64MB and mount stuff like /etc/asterisk, /var/log, /var/run and voicemail etc on that one, possibly leaving the main card mounted read-only for most of the time.

http://www.limeylinux.org/

Setting up

Using Digium cards for FXS/FXO

Zaptel modules

Use the command genzaptelconf -d to generate new config files. Generates /etc/zaptel.conf and /etc/asterisk/zapata-channels.conf files.

Echo cancellation and gain settings on FXO lines

This page covers both of these topics:http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current/docs-html/x1695.html

This one is interesting too: http://www.rowetel.com/blog/?p=18

  1. Edit /etc/zaptel.conf to adjust receive and xmit gain levels.
  2. Use ztmonitor channel to see levels during a call.
  3. Use asterisk -r and the reload command to change settings during a call.

Web interface

Voicemail

User interface

On delete of message, move it to Trash/

Administration interface

  • Should trashed messages be deleted or archived? How often?
  • Should messages marked as old be deleted or archived? How often?
  • Per user control of Trash/ ?

Service providers

Internet Telephony Service Providers

Links

Asterisk

Digital signal processing and Spandsp: http://www.soft-switch.org/

The Blackfin project http://rowetel.com/ucasterisk/


Digium

Elastix

iPitomy

Qualmetrics

Trixbox

Retrieved from "https://wiki.wildsong.biz//index.php?title=VOIP&oldid=11197"