|
|
| (5 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| 2020-May-07 [[Wink]] announced they are going to a subscription service, so I am migrating to [[OpenHab]]
| | #REDIRECT [[Home control]] |
| | |
| I bought a [https://www.homedepot.com/p/Wink-Bright-PPBNDL-WNK1/302121348 Wink Bright kit] from Home Depot (6/26/18) and two Cree Zigbee bulbs from Amazon (6/23/18) Later (12/18) I got the outlets.
| |
| | |
| I have other stuff that was not usable in the Wink system that I have not documented yet.
| |
| | |
| == Hardware ==
| |
| Controller:
| |
| * OpenHab running in Docker on [[Bellman]].
| |
| * [https://www.nortekcontrol.com/products/2gig/husbzb-1-gocontrol-quickstick-combo/ Nortek HUSBZB-1] to talk Zigbee and ZWave purchased 5/7/20 from Newegg
| |
| | |
| Controlled:
| |
| * 2 bulbs that came with Wink
| |
| * 1 soft white bulb: Cree BA19-08027OMF-12CE26-1C100 Connected 60W Equivalent Soft White
| |
| * 1 daylight bulb: Cree BA19-08050OMF-12CE26-1C100 Connected 60W Equivalent Daylight (5000K)
| |
| * 2 two Centralite Mini outlets (from Amazon) to control strings of X-mas lights.
| |
| | |
| == Set up ==
| |
| | |
| # Edit docker-compose.yml
| |
| # docker-compose up
| |
| # https://openhab:8444/ (I moved it up a port becasue UniFi is already running at 8443.)
| |
| | |
| === Nortek ===
| |
| | |
| The Nortek is now plugged in and shows up in lsusb as
| |
| | |
| Bus 003 Device 007: ID 10c4:8a2a Cygnal Integrated Products, Inc.
| |
| | |
| dmesg sees it as 2 serial ports,
| |
| <pre>
| |
| [1200065.974054] usb 3-1.2: new full-speed USB device number 7 using ehci-pci
| |
| [1200066.085372] usb 3-1.2: New USB device found, idVendor=10c4, idProduct=8a2a, bcdDevice= 1.00
| |
| [1200066.085378] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
| |
| [1200066.085382] usb 3-1.2: Product: HubZ Smart Home Controller
| |
| [1200066.085385] usb 3-1.2: Manufacturer: Silicon Labs
| |
| [1200066.085388] usb 3-1.2: SerialNumber: 81300CEB
| |
| [1200066.116633] usbcore: registered new interface driver usbserial_generic
| |
| [1200066.116667] usbserial: USB Serial support registered for generic
| |
| [1200066.124434] usbcore: registered new interface driver cp210x
| |
| [1200066.124471] usbserial: USB Serial support registered for cp210x
| |
| [1200066.124540] cp210x 3-1.2:1.0: cp210x converter detected
| |
| [1200066.127400] usb 3-1.2: cp210x converter now attached to ttyUSB0
| |
| [1200066.127806] cp210x 3-1.2:1.1: cp210x converter detected
| |
| [1200066.130746] usb 3-1.2: cp210x converter now attached to ttyUSB1
| |
| </pre>
| |
| | |
| So this means I have to add /dev/ttyUSB0 and /dev/ttyUSB1 and the JAVA OPTS to the docker-compose.yml file and restart it.
| |
| EXTRA_JAVA_OPTS="-Dgnu.io.rxtx.SerialPorts=/dev/ttyUSB0:/dev/ttyUSB1"
| |
| | |
| I have to set up a "coordinator" manually, so
| |
| | |
| docker exec -it openhab bash
| |
| | |
| | |
| [[Category: IoT]]
| |
