Lassen SQ: Difference between revisions
Brian Wilson (talk | contribs) m →Linux |
Brian Wilson (talk | contribs) mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Overview == | == Overview == | ||
The SQ is a module slightly larger than a quarter | 2023-08-20 '''decommissioned'''; can't get iq_monitor.exe anywhere. Not worth the effort to get it going without it. | ||
The SQ is a module slightly larger than a quarter and has pretty good specs; low power and pretty good accuracy. The pin-compatible IQ is even better but I got this SQ from eBay awhile back so it's what I am playing with. If this is too much fun to handle I will get an IQ later. | |||
== Launch == | == Launch == | ||
| Line 23: | Line 25: | ||
I used the program to upload an a [[GPS Almanac]] into the module. | I used the program to upload an a [[GPS Almanac]] into the module. | ||
I need to get a 12mm battery for the developer board to keep the almanac around when the computer is powered down. | I need to get a 12mm battery (CR1225) for the developer board to keep the almanac around when the computer is powered down. | ||
I put the antenna outside (it comes with a long antenna cable!) and I've got a 3D fix now. | I put the antenna outside (it comes with a long antenna cable!) and I've got a 3D fix now. | ||
Latest revision as of 20:24, 20 August 2023
Overview
2023-08-20 decommissioned; can't get iq_monitor.exe anywhere. Not worth the effort to get it going without it.
The SQ is a module slightly larger than a quarter and has pretty good specs; low power and pretty good accuracy. The pin-compatible IQ is even better but I got this SQ from eBay awhile back so it's what I am playing with. If this is too much fun to handle I will get an IQ later.
Launch
I obtained a developer board with USB from SparkFun.com and I have plugged the SQ into the board and powered up by connecting a USB cable.
To get it going, I installed Windows 2000 drivers from Silicon Labs and am now running the iQ_Monitor.exe program which SparkFun has on their website. It's running on com port 8. iQ_Monitor is a dandy free program.
The other program iQ_Chat wants to talk on funny serial ports that I don't have -- com1 and com2. :-) I am running W2K in VMware right now.
iQ_Monitor
I am in my house right now and the Trimble antenna is in my window. I doubt it has a good view! The Magnavox (with the antenna on the roof sees these satellites: 01,02,04,13,16,20,23,24,27
Here is a screen shot of the program right now.
In the time it took me to capture, edit and upload this image, the SQ has locked onto 2 satellites. It has a bad view of the sky right now, poor thing.
I used the program to upload an a GPS Almanac into the module.
I need to get a 12mm battery (CR1225) for the developer board to keep the almanac around when the computer is powered down.
I put the antenna outside (it comes with a long antenna cable!) and I've got a 3D fix now.
Serial port settings
Defaults were 9600 8 data bits, odd parity, 1 stop bit, TSIP input and output. The iQ_Monitor program allows you to change to other modes, but then you can no longer use it to talk to the SQ. This is bad. :-) I don't have a battery on my adapter board so I unplugged it for a few seconds and it went back to 'normal'.
TSIP is a proprietary Trimble binary protocol but it is well documented.
I checked http://www.freegis.org/ but could not find anything there.
Interfacing
Here is a paper I found about interfacing the SQ to another device.
http://www.eng.yale.edu/enalab/projects/MK2_GPS/MK2_LASSENGPS.pdf
Linux
Linux 2.6.12 finds the right driver and I can see it via minicom on /dev/ttyUSB0 but since the module comes up in TSIP mode (see above) it's not working yet under Linux. I plan on using this with a Bluetooth connection to my Dell X50V running Arcpad, so I am not sure if I care.
