37 Sensors Kit: Difference between revisions
Brian Wilson (talk | contribs) mNo edit summary |
Brian Wilson (talk | contribs) mNo edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
Today I am looking at making a closet light. I had an IKEA light in there but it quit. It uses a reflective sensor and an LED strip. | Today I am looking at making a closet light. I had an IKEA light in there but it quit. It uses a reflective sensor and an LED strip. | ||
I think I can put one of the reflective sensors from the 37 sensor kit. They have "Avoidance" and "Tracking" sensors. I can just hook one of them up to a spare [[M5StickC]] and there you go. It will send MQTT updates to [[Home Assistant]] and HA will tell the light to go on via a Martin Jerry switch. "Simple". Ha. | I think I can put one of the reflective sensors from the 37 sensor kit. They have "Avoidance" and "Tracking" sensors. I can just hook one of them up to a spare [[M5StickC]] and there you go. It will send MQTT updates to [[Home Assistant]] and HA will tell the light to go on via a [[Martin Jerry]] switch. "Simple". Ha. | ||
I can use either the HAT connector or the Grove connector. | I can use either the HAT connector or the Grove connector. | ||
== | == Tracking module == | ||
[https://www.sunfounder.com/products/tracking-sensor-module?_pos=1&_sid=b5229a690&_ss=r | [https://www.sunfounder.com/products/tracking-sensor-module?_pos=1&_sid=b5229a690&_ss=r Tracking module] | ||
3 pin connector: signal, power, ground | 3 pin connector: signal, power, ground | ||
| Line 21: | Line 21: | ||
== Tracking module == | == Tracking module == | ||
This is | This is a newer version of the [https://www.sunfounder.com/products/obstacle-avoidance-sensor?_pos=1&_sid=85d77439b&_ss=r Avoidance sensor]. | ||
[[Category: | [[Category:IoT]] | ||
[[Category: Embedded]] | [[Category:Embedded]] | ||
[[Category:Electronics]] | |||
Latest revision as of 14:03, 11 June 2024
I don't remember where I bought this kit. It's branded "Robotlinking" but robotlinking.com is gone, now it's https://sunfounder.com/
Closet light sensor
Today I am looking at making a closet light. I had an IKEA light in there but it quit. It uses a reflective sensor and an LED strip.
I think I can put one of the reflective sensors from the 37 sensor kit. They have "Avoidance" and "Tracking" sensors. I can just hook one of them up to a spare M5StickC and there you go. It will send MQTT updates to Home Assistant and HA will tell the light to go on via a Martin Jerry switch. "Simple". Ha.
I can use either the HAT connector or the Grove connector.
Tracking module
3 pin connector: signal, power, ground Mine has 4 pins, this one has only 3. (One pin is NC)
It has an LM393 comparator. Sensitivity can be adjusted with a trimpot. It has 2 visible LEDs to give status. D1 show power (labeled "PLED"). D2 shows state ("SLED").
Tracking module
This is a newer version of the Avoidance sensor.
