WiFi Wireless Projects: Difference between revisions

From Wildsong
Jump to navigationJump to search
Brian Wilson (talk | contribs)
Brian Wilson (talk | contribs)
Line 42: Line 42:
I guess if I am going this route I best pull out the Pi Zero W now.
I guess if I am going this route I best pull out the Pi Zero W now.
The Pi 4 is a big mess all over the kitchen counter now anyway.
The Pi 4 is a big mess all over the kitchen counter now anyway.
== Kismet ==
On Raspbian (Tenrec Pi 4) these commands fail with a libprotopub error -- okay -- going over to Kali!
wget -O - https://www.kismetwireless.net/repos/kismet-release.gpg.key | sudo apt-key add -
echo 'deb https://www.kismetwireless.net/repos/apt/release/buster buster main' | sudo tee /etc/apt/sources.list.d/kismet.list
sudo apt update
sudo apt install kismet


==Wireless resources==
==Wireless resources==

Revision as of 18:50, 27 August 2022

Presence detection

Working on detecting when my phone enters and leaves the Wildsong AP. Presence detection

Wardriving

Setting up a Raspberry Pi to do some wardriving (or warcycling or warwalking?) Will probably use an Alfa 802.11b/g/n adapter from Rokland.

  • Horst = Highly Optimized Radio Scanner Tool = low footprint
  • Kismet = been around longer, more features

Testing on Pi 4 Tenrec today with sudo iwlist wlan0 scan|grep SSID With the Alfa I see 35 stations. On the built in wlan0 I see 9. So, Alfa it is. The built in interface is dual band (2.4 and 5.8) but the Alfa is 2.4 only. I might want to replace the Alfa later but most access points advertise on both bands so I don't think it matters to me right now.

Quickie test: sudo iwlist wlan1 scan

Examine interfaces with

sudo iw dev
sudo iw phy phy0 info
sudo iw phy phy3 info 

Horst info:

To-do:

  • Install and test Alfa (DONE)
  • Install and test Horst. Done but need to know more about it; logging? GPS?
  • Install and test Kismet on Pi 4
  • hook up a GPS (in car: UBlox AEK-4P walking? I have a little chip GPS around)
  • remove the Pi 4 from the 7" screen -or- go with a Pi 3 -or- even a Pi Zero?

Can I run this software on a Pi Zero? I just want to log data, nothing else. That would be Kali on Pi0W

I guess if I am going this route I best pull out the Pi Zero W now. The Pi 4 is a big mess all over the kitchen counter now anyway.

Kismet

On Raspbian (Tenrec Pi 4) these commands fail with a libprotopub error -- okay -- going over to Kali!

wget -O - https://www.kismetwireless.net/repos/kismet-release.gpg.key | sudo apt-key add -
echo 'deb https://www.kismetwireless.net/repos/apt/release/buster buster main' | sudo tee /etc/apt/sources.list.d/kismet.list
sudo apt update
sudo apt install kismet

Wireless resources

Personal Telco Portland

WISP news

Frontier Broadband Industry News http://www.frontierbb.com/blogger.shtml

Broadband Wireless Exchange http://www.bbwexchange.com/

Wireless Internet Service Provider Association http://www.wispa.org

Equipment suppliers

Single board computers

Rokland Alfa high power WiFi USB adapters

Metrix Wireless development kits

Fleeman Anderson Bird Antennas and a lot more. Really like these folks.

Manufacturers

E-zy made the EZ-2-Go radios that I just got for Chintimini

RouterBoard

[Ubiquiti] makes some products that look interesting including the "Bullet".

Organizations

Certified Wireless Network Providers Bluetooth
IrDA
Wi-Fi
Wi-Max
Zigbee