Violet: Difference between revisions
Brian Wilson (talk | contribs) mNo edit summary |
Brian Wilson (talk | contribs) |
||
| Line 13: | Line 13: | ||
cat /etc/udev/rules.d/60-serial-port-permissions.rules | cat /etc/udev/rules.d/60-serial-port-permissions.rules | ||
KERNEL=="ttyUSB[0-9]*", MODE="0666" | KERNEL=="ttyUSB[0-9]*", MODE="0666" | ||
So how to do the installation with Ansible? HM? | |||
Tasks include | |||
Install standard "lite" bookworm image to an SD card with the imager. This creates user bwilson and installs my public key. | |||
Install docker (run docker_installer.sh) | |||
Add bwilson to the docker group | |||
Copy the data volumes for home assistant and mosquitto | |||
Change the serial port permissions as mentioned above. | |||
Set up watchdog | |||
You should be able to connect to http://homeassistant.local | |||
Filesystem 1K-blocks Used Available Use% Mounted on | |||
/dev/mmcblk0p2 30083620 8344660 20190664 30% / | |||
/dev/mmcblk0p1 522232 74110 448122 15% /boot/firmware | |||
That's 8GB used in / | |||
Watchdog | |||
On bookworm, the devices already exist (See /dev/watchdog*) | |||
[[Category: Computers]] | [[Category: Computers]] | ||
[[Category: Raspberry Pi]] | [[Category: Raspberry Pi]] | ||
Revision as of 05:27, 7 May 2024
Violet is a Raspberry Pi Model 3B+
- 32 GB micro sd
- Nortek USB Zigbee / ZWave adapter
History
- 2023-12-23 Install Debian Bookworm (12) and Docker and Home Assistant.
- 02/14/2022 Installed 64-bit Raspian.
I created a file in /etc/udev/rules.d to open up permissions on the serial ports, so that they work for Home Assistant in Docker.
cat /etc/udev/rules.d/60-serial-port-permissions.rules KERNEL=="ttyUSB[0-9]*", MODE="0666"
So how to do the installation with Ansible? HM? Tasks include Install standard "lite" bookworm image to an SD card with the imager. This creates user bwilson and installs my public key. Install docker (run docker_installer.sh) Add bwilson to the docker group Copy the data volumes for home assistant and mosquitto Change the serial port permissions as mentioned above. Set up watchdog You should be able to connect to http://homeassistant.local
Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30083620 8344660 20190664 30% /
/dev/mmcblk0p1 522232 74110 448122 15% /boot/firmware
That's 8GB used in /
Watchdog
On bookworm, the devices already exist (See /dev/watchdog*)
