VOIP: Difference between revisions

From Wildsong
Jump to navigationJump to search
Brian Wilson (talk | contribs)
Brian Wilson (talk | contribs)
Line 83: Line 83:


[http://www.asterisk.org/ Asterisk]
[http://www.asterisk.org/ Asterisk]
[http://www.freeworlddialup.com Free World Dialup]


Digital signal processing and Spandsp: http://www.soft-switch.org/
Digital signal processing and Spandsp: http://www.soft-switch.org/


The Blackfin project http://rowetel.com/ucasterisk/
The Blackfin project http://rowetel.com/ucasterisk/

Revision as of 03:40, 20 December 2009

Hardware

PSTN gateways

I tried out a Linksys SPA-400 with 3 PSTN analog phone lines and an Asterisk server running on a recycled PC. It probably works fine as intended, in an all Linksys system but I was never able to get it to work reliably with Asterisk. The irony is that the SPA-400 runs Linux and Asterisk internally.

You can download the source tarball from the Linksys site.

version 1.0.0.2

It's based on Monta Vista Hardhat Linux

  • MIPS processor
  • ?? Flash
  • ?? RAM
  • Linux 2.4 kernel
  • Busybox
  • Asterisk PBX software
  • thttpd
  • /usr/sbin/lightbox controls LED's
  • dropbear ssh

After a few months of wrestling with it, we bought a TDM-400 and sold the SPA-400 on eBay.

Digium X100P

These are fine if you only need one line, cheap on ebay.

Digium TDM400

This is the card I am working with now. It's great.

Sipura SPA3000

I'd like to try one of these as a single line solution.

I have a SPA3102 now that I picked up for the Chintimini Wireless Project.

Asterisk

You might want to use an IDE/CF adapter that can hold two CF cards. This way you could stick in a smaller second card -say- 32 or 64MB and mount stuff like /etc/asterisk, /var/log, /var/run and voicemail etc on that one, possibly leaving the main card mounted read-only for most of the time.

http://www.limeylinux.org/

Setting up

Using Digium cards for FXS/FXO

Zaptel modules

Use the command genzaptelconf -d to generate new config files. Generates /etc/zaptel.conf and /etc/asterisk/zapata-channels.conf files.

Echo cancellation and gain settings on FXO lines

This page covers both of these topics:http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current/docs-html/x1695.html

This one is interesting too: http://www.rowetel.com/blog/?p=18

  1. Edit /etc/zaptel.conf to adjust receive and xmit gain levels.
  2. Use ztmonitor channel to see levels during a call.
  3. Use asterisk -r and the reload command to change settings during a call.

Web interface

Voicemail

User interface

On delete of message, move it to Trash/

Administration interface

  • Should trashed messages be deleted or archived? How often?
  • Should messages marked as old be deleted or archived? How often?
  • Per user control of Trash/ ?

Service providers

Internet Telephony Service Providers

Links

Asterisk

Digital signal processing and Spandsp: http://www.soft-switch.org/

The Blackfin project http://rowetel.com/ucasterisk/