Bringing up dart: Difference between revisions
From Wildsong
Jump to navigationJump to search
Brian Wilson (talk | contribs) |
Brian Wilson (talk | contribs) |
||
Line 15: | Line 15: | ||
Wrote a simple partition table | Wrote a simple partition table | ||
mkfs.ext4 /dev/sda1 | mkfs.ext4 /dev/sda1 | ||
hdparm -t /dev/sda1 | |||
/dev/sda1: | |||
Timing buffered disk reads: 908 MB in 3.00 seconds = 302.47 MB/sec | |||
== CentOS install == | == CentOS install == |
Revision as of 01:26, 30 November 2012
Hardware
- SuperMicro 4U server case
- SuperMicro X9SRA motherboard
- Intel Xeon E5-2650 Sandy Bridge-EP 2.0GHz (2.8GHz Turbo Boost) LGA 2011 95W 8-Core Server Processor
- SUPERMICRO SNK-P0050AP4 Heatsink for Supermicro X9DR3-F Motherboard
- 32GB ECC registered RAM (4 x 8GB)
- Four 15K 150GB drives HITACHI HUS153014VL
- Corsair Neutron Series GTX CSSD-N240GBGTX-BK 2.5" 240GB SATA III Internal Solid State Drive (SSD)
- 3Ware 9690SA-4I SATA/SAS RAID controller
The SAS drives are configured as RAID 5 = 435 GB
fdisk /dev/sda Wrote a simple partition table mkfs.ext4 /dev/sda1 hdparm -t /dev/sda1 /dev/sda1: Timing buffered disk reads: 908 MB in 3.00 seconds = 302.47 MB/sec
CentOS install
Install minimal system from DVD
vi /etc/sysconfig/network-scripts/ifcfg-eth0 vi /etc/resolv.conf service network restart yum -y install emacs yum -y install openssh-clients yum -y install gcc unzip yum -y install hdparm yum -y install httpd yum update reboot
Basic software install
Install PostGIS 2.0