Tenrec: Difference between revisions
From Wildsong
Jump to navigationJump to search
Brian Wilson (talk | contribs) Created page with "Tenrec is a Raspberry Pi 4B I am setting it up as a build machine 2020-May-09 arrived from Newark == Hardware == * 4GB 4B * [https://www.seeedstudio.com/Heat-Sink-Kit-for-..." |
Brian Wilson (talk | contribs) mNo edit summary |
||
| Line 11: | Line 11: | ||
* [https://www.element14.com/community/community/raspberry-pi/blog/2016/05/06/raspberry-pi-7-capacitive-touch-display-assembly-and-enclosure 7" Pi touch screen] from Element14 | * [https://www.element14.com/community/community/raspberry-pi/blog/2016/05/06/raspberry-pi-7-capacitive-touch-display-assembly-and-enclosure 7" Pi touch screen] from Element14 | ||
* Multicomp Pro case, clear | * Multicomp Pro case, clear | ||
* Corsair GTX 240GB SSD | * Corsair Neutron GTX 240GB SSD | ||
I followed instructions here to set up the SSD. | |||
https://jamesachambers.com/raspberry-pi-4-usb-boot-config-guide-for-ssd-flash-drives/ | |||
I had an old Rosewill USB3 2.5" enclosure that works but won't run on the Pi ports (power issue). | |||
So it's on a USB2 hub slowing it down. I ordered a new USB3 hub this evening. | |||
Revision as of 06:06, 11 May 2020
Tenrec is a Raspberry Pi 4B
I am setting it up as a build machine
2020-May-09 arrived from Newark
Hardware
- 4GB 4B
- Seeed heatsink kit so cute, had to have one.
- 7" Pi touch screen from Element14
- Multicomp Pro case, clear
- Corsair Neutron GTX 240GB SSD
I followed instructions here to set up the SSD. https://jamesachambers.com/raspberry-pi-4-usb-boot-config-guide-for-ssd-flash-drives/
I had an old Rosewill USB3 2.5" enclosure that works but won't run on the Pi ports (power issue). So it's on a USB2 hub slowing it down. I ordered a new USB3 hub this evening.
