ESP32-C3

I am interested in RISC V and this seemed like a good way to get my hands on one. (Or 5)

I have 5 AI-Thinker ESP-C3-12F chips and a DOITING programmer thingie that I can pop them into. It's like this one, I don't remember where I bought it. It breaks out the pins and has a ESP-01S 2x4 pin socket and gives me a USB connection.

Single core processor, 4MB flash, 400K ram

Development options

Suggestions https://github.com/laris/rust-embedded-study-esp32-c3

Rust and Tock https://github.com/tock/tock Looks interesting but clearly it's early days for this one. I will get my feet under me first.

Micropython https://micropython.org/download/esp32c3-usb/ This is the obvious starting point for me because it's Python.

ESP-IDF This is probably the best option for serious work for example sticking a C3 in a light switch.

Arduino https://github.com/espressif/arduino-esp32 The Arduino option is the most practical but dull. :-)

Micropython

Download esptool.py from [email protected]:espressif/esptool.git

Plug in the board and figure out what port it shows up on.

On the Mac, where it does not work.

ls /dev/tty.*
/dev/tty.Bluetooth-Incoming-Port	/dev/tty.usbserial-0001

On Windows, after installing the CP2102 driver from Silicon Labs,

Coolest feature of this chip?

I2S

Compatible with old Esp12F?

6 channels of PWM

BLE 5.0?

RTC + 4 different power modes

Temperature sensor