Travel: Difference between revisions
Brian Wilson (talk | contribs) |
Brian Wilson (talk | contribs) m →CanBus |
||
| Line 44: | Line 44: | ||
== CanBus == | == CanBus == | ||
I got an OBD2 extension cable with 90 degree ends to make a low profile connection. I cut the cable in half. (Photo!) Now I have a connector with a 18" cable ready to use. | I got an OBD2 extension cable with 90 degree ends to make a low profile connection. I cut the cable in half. (Photo!) Now I have a connector with a 18" cable ready to use. | ||
[[File:Screenshot 2024-09-13 124245.png|left|thumb|480x480px|OBD2 - RS232]] | |||
1 -- | |||
2 -- | |||
3 -- GND -- | |||
3 | |||
4 | 4 | ||
| Line 57: | Line 55: | ||
5 | 5 | ||
6 | 6 -- CANH -- | ||
7 | 7 | ||
| Line 63: | Line 61: | ||
8 | 8 | ||
9 | 9 -- "Vendor option" -- Brown | ||
10 | 10 -- J1850 bus -- Yellow | ||
11 | 11 -- Vendor option | ||
12 | 12 | ||
| Line 73: | Line 71: | ||
13 | 13 | ||
14 | 14 -- CANL -- Green | ||
15 -- Blue | |||
16 -- 12V always on -- Brown | |||
=== MCP2515 === | === MCP2515 === | ||
| Line 85: | Line 84: | ||
https://www.14core.com/wiring-the-mcp2515-shield-with-obd-on-arduino/ connector info | https://www.14core.com/wiring-the-mcp2515-shield-with-obd-on-arduino/ connector info | ||
https://www.14core.com/wiring-the-mcp2515-controller-area-network-can-bus-diagnostics/ | |||
https://github.com/kvba1/ESP32-MCP2515-OBD2-CANBUS ESP32 + MC2515 | https://github.com/kvba1/ESP32-MCP2515-OBD2-CANBUS ESP32 + MC2515 | ||
Revision as of 19:46, 13 September 2024
TO DO
- Check tire pressure
- Remove luggage rack
- Mount bike rack
- Charge batteries for BT keyboard
- Charge battery in emergency phone
- Charge HT batteries
Garmin - load pocket queries
Hacking
- SenseCAP Indicator and cables
- Seeed CANBUS adapter
- Hookup Grove to CANBUS
- OBD-II to CANBUS
- Laptop and charger
- Laptop adapter (USB)
- Comp notebook
- USB3 hub
- 5V supply
- M5StickC with micropython and PIR hat
- M5 Atom Echo speaker
- 3 x USB-C cables
Raspberry Pi
- Pi 4
- 4" monitor
- Logitech KBD and mouse and USB dongle
- USB3 drive
Tools
- screwdrivers
- needle nose pliers
- small cutters
- red voltmeter
- usual tool kit in bag, screwdrivers, torx drivers, usb cables
CanBus
I got an OBD2 extension cable with 90 degree ends to make a low profile connection. I cut the cable in half. (Photo!) Now I have a connector with a 18" cable ready to use.
1 --
2 --
3 -- GND --
4
5
6 -- CANH --
7
8
9 -- "Vendor option" -- Brown
10 -- J1850 bus -- Yellow
11 -- Vendor option
12
13
14 -- CANL -- Green
15 -- Blue
16 -- 12V always on -- Brown
MCP2515
Seeed Xiao
I intend trying this one first because it's got a more commonly used chip on it.
https://www.14core.com/wiring-the-mcp2515-shield-with-obd-on-arduino/ connector info
https://www.14core.com/wiring-the-mcp2515-controller-area-network-can-bus-diagnostics/
https://github.com/kvba1/ESP32-MCP2515-OBD2-CANBUS ESP32 + MC2515
https://github.com/yogiD/MCP2515-OBD Arduino + MCP2515
GD32E103CA
Seed + Grove from Longan Labs https://github.com/Longan-Labs/Serial_CAN_FD_Module
