SG20 Specs: Difference between revisions
From Wildsong
Jump to navigationJump to search
Brian Wilson (talk | contribs) |
Brian Wilson (talk | contribs) |
||
| Line 28: | Line 28: | ||
[ 10.870000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 | [ 10.870000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 | ||
== Orinoco | == Orinoco pccard == | ||
Kernel running right now is 2.6.20.15 from the | |||
linux-image-server package and it has problems with my Orinoco Silver WiFi card. | |||
I know the slot works because I can use a USB adapter just fine. It's | |||
a 32 bit cardbus card and shows up with lspci command. See the section above. | |||
The reluctant Orinoco card reports this in dmesg | The reluctant Orinoco card reports this in dmesg | ||
| Line 34: | Line 40: | ||
[ 1935.880000] pccard: PCMCIA card inserted into slot 0 | [ 1935.880000] pccard: PCMCIA card inserted into slot 0 | ||
[ 1935.880000] cs: warning: no high memory space available! | [ 1935.880000] cs: warning: no high memory space available! | ||
Manually loading the orinoco and orinoco_cs drivers with modprobe does not help. | |||
lspcmcia -vvv reports | lspcmcia -vvv reports | ||
Revision as of 15:20, 29 July 2007
General
This is what the system thinks of itself, with a USB card in the pccard slot.
# lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 0c) 00:0a.0 Communication controller: Agere Systems LT WinModem 00:0b.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller 02:00.0 USB Controller: NEC Corporation USB (rev 43) 02:00.1 USB Controller: NEC Corporation USB (rev 43) 02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
Hard drives
The disk drives as described by dmesg
[ 46.385903] Probing IDE interface ide0... [ 10.510000] hda: TOSHIBA MK3017GAP, ATA DISK drive [ 10.520000] Time: acpi_pm clocksource has been installed. [ 10.810000] hdb: FUJITSU MHV2080AT, ATA DISK drive [ 10.870000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Orinoco pccard
Kernel running right now is 2.6.20.15 from the linux-image-server package and it has problems with my Orinoco Silver WiFi card.
I know the slot works because I can use a USB adapter just fine. It's a 32 bit cardbus card and shows up with lspci command. See the section above.
The reluctant Orinoco card reports this in dmesg
[ 1935.880000] pccard: PCMCIA card inserted into slot 0 [ 1935.880000] cs: warning: no high memory space available!
Manually loading the orinoco and orinoco_cs drivers with modprobe does not help.
lspcmcia -vvv reports
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:0b.0)
Configuration: state: on ready: yes
Voltage: 5.0V Vcc: 5.0V Vpp: 5.0V
Available IRQs: 5
Available ioports: 0x00000100 - 0x000003af
0x000003e0 - 0x000004cf
0x000004d8 - 0x000004ff
0x00000820 - 0x000008ff
0x00000a00 - 0x00000aff
0x00000c00 - 0x00000cf7
Available iomem: 0x000c0000 - 0x000fffff
