Kenwood TH-F6A
I have a Kenwood TH-F6a triband handheld. I upgraded it with a Comet antenna when I bought it around 2007. It was my first ham radio purchase.
Programming
I realized I want to program the scanner with repeater frequencies etc. and what a pain it is to do by hand, so I am bought an RS232 programming cable (eBay for $14 including shipping).
Programming by hand (no computer available)
RTFM
Programming with a computer
Wiring on the cable: http://www.radioctl.com/english/THF6F7Cable.html
"Radio Control" software that goes with the cable diagram. http://www.radioctl.com/english/THF6F7.html
When I use the Mac, I use my generic USB-RS232 cable which shows up in Windows as a Prolific 2303 on COM3.
Don't forget the radio has to be set up to talk to the computer over the SP/MIC jack. By default it's set to talk to a Speaker/Mic. (Who would have thought.) User manual page 45.
- Push MNU
- Turn knob to select SP/MIC menu
- Select PC
- Push MNU to save or PTT to cancel
Set back to SP/MIC when done if you have a speaker/mic like I do.
Grig + hamlib
I just fired up grig ("apt-get install grig") for the first time. I am running on a Parallels VM called "Xubuntu Cinnamon" in my MacBookPro, Plover.
The command I used was: grig -m 219 -r /dev/ttyUSB0 In the radio I had to switch (MNU button) the setting from SP/Mic to PC to get it to use the SP/Mic jacks as a serial port.
I can see some settings but grig does not seem to do much.
At least I know the serial port is working and that Windows 7 + Kenwood MCP program is faulty. I can tune the radio. Have not been able to make it do anything useful.
Kenwood's software
Windows program is downloadable from http://www.kenwood.com/i/products/info/amateur/software_download.html
"Memory Control Program MCP-F6/F7 Version 1.01" Still current as of Sept 2015
Documentation
This is a very interesting page on the TH-F6A; including several manuals and full schematics. http://www.hampedia.net/kenwood/th-f6a.php
Here are another ham's notes: http://www.brenemanlabs.com/Thf6a.htm
