Plover

From Wildsong
Jump to navigationJump to search

Plover is a "Late 2013" MacBook Pro with Retina display. Model number A1502

The screen delaminated when it was about 2 years old, but it's still usable. I missed out on getting Apple to fix it for free.

When I had ArcGIS installer here I ran Parallels on Plover.

History

2023-03-26 -- Installed Elementary 7.1 still no WiFi but charge goes up to 100% now.

2022-12-20 -- Got the new TP-Link wifi going.

2022-12-10 -- It's now running Elementary OS, with 2 small problems. The charge indicator never goes above 61%, and Wifi driver.

Support for Mac OS upgrades stopped.

2019-??-?? -- I have Mojave on it now

2018-Jul-23 -- Removed ESRI software, personal license is now on Murre, developer license is history.

2016-Sep-02 -- Installed updates this morning and now it can't find any apps. See below

2016-Jan-16 -- I put El Capitan on it yesterday.

Software

sudo apt install build-essential emacs-nox vlc
sudo apt install snapd
snap install firefox

Install Docker Engine

This is so I can do building and testing without installing any more software. I have to install Docker so I don't have to install more... ha!

https://docs.docker.com/engine/install/ubuntu/

sudo apt-get install -y ca-certificates curl gnupg
sudo mkdir -m 0755 -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
echo \
  "deb [arch="$(dpkg --print-architecture)" signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu \
  "jammy stable" | \
  sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
apt update
sudo apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
sudo usermod -a -G docker bwilson

Log out and back in again and then test it with

docker run -it --rm debian bash

Broadcom (built-in) WiFi

WiFi - I failed to find the right magic to make the built-in WiFi work with Elementary OS. For a week I used an Alfa USB device which is bulky and slow. Then the new TP-Link arrived and I had to do the dance to make it work. I think it's faster anyway.

lspci -vnn | grep -i net shows the built-in interface, which I don't have working yet.

03:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4360 802.11ac Wireless Network Adapter [14e4:43a0] (rev 03)
	Subsystem: Apple Inc. BCM4360 802.11ac Wireless Network Adapter [106b:0112]
	Flags: bus master, fast devsel, latency 0
	Memory at b0600000 (64-bit, non-prefetchable) [size=32K]
	Memory at b0400000 (64-bit, non-prefetchable) [size=2M]
	Capabilities: [48] Power Management version 3
	Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [68] Vendor Specific Information: Len=44 <?>
	Capabilities: [ac] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [13c] Device Serial Number 3c-15-00-ff-ff-00-00-01
	Capabilities: [150] Power Budgeting <?>
	Capabilities: [160] Virtual Channel
	Capabilities: [1b0] Latency Tolerance Reporting
	Capabilities: [220] Resizable BAR <?>
	Kernel modules: bcma

Accordingly I need to install the "wl" driver, see https://wiki.debian.org/wl#Debian_7_.22Wheezy.22

Should be here since this is Ubuntu not Debian Wheezy. https://launchpad.net/ubuntu/+source/bcmwl

The table there gives me "14e4:43a0 bcmwl-kernel-source bcmwl-kernel-source"

So I need to do the kernel thing. I dutifully installed the bcmwl-kernel-source package, it built the drivers, but they won't load because they say there is a symbol missing. Like this: "insmod: ERROR: could not insert module brcmsmac.ko: Unknown symbol in module"

Don't use insmod.... ooohhh.... !!! Use modprobe, like this,

modprobe -v brcmsmac
insmod /lib/modules/5.15.0-56-generic/kernel/drivers/bcma/bcma.ko 
insmod /lib/modules/5.15.0-56-generic/kernel/lib/math/cordic.ko 
insmod /lib/modules/5.15.0-56-generic/kernel/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko 
insmod /lib/modules/5.15.0-56-generic/kernel/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko 

TP-Link AC1300 WiFi adapter

My card identifies as TP-Link AC1300 "Archer T3U Nano" (2357:012e)

The procedure to get it working changed when I installed Elementary 7 (Ubuntu Jammy). I found this solution https://community.tp-link.com/en/home/forum/topic/547276

I have to do this again every time the kernel gets upgraded.

sudo apt update
sudo apt install git dkms linux-headers-`uname -r`
cd ~/WiFiDrivers
wget https://github.com/RinCat/RTL88x2BU-Linux-Driver/archive/master.zip
unzip master.zip
cd RTL88x2BU-Linux-Driver-master
sudo make uninstall
make clean
make
sudo make install
sudo modprobe 88x2bu
sudo reboot

Upon reboot, the green LED in the USB dongle started blinking. That was highly satisfying! And also, it works now.

Camera

As of Elementary 7, the built-in camera does not work; I use a USB when I need to Zoom. I use it less than once a month so it's not a big deal. I tried to fix the camera by following instructions here: https://github.com/patjak/facetimehd/wiki/Get-Started#devvideo-not-created I had trouble getting the driver to install in bcwc_pcie/, sudo make install gives me arch/x86/Makefile:142: CONFIG_X86_X32 enabled but no binutils support

Clear DNS cache

sudo killall -HUP mDNSResponder

Dual displays

Apple does a superlative job of supporting multiple displays, I can plug in 2 external monitors and get 3 total separate displays or I can use external mouse and keyboard working with the lid closed on the Mac.

  1. Plug in a cheap Firewire/Thunderbolt DVI adapter on the left side of Plover.
  2. Connect monitor #1 (Dell 20") to the adapter.
  3. Connect monitor #2 (Acer 23") to the DVI port on the right side of Plover
  4. Connect Plover to AC power and close the lid.
  5. Set the monitors to separate mode (not mirrored) using icon in Menu bar.

Use with either USB or Bluetooth keyboard and mouse.

Voila! 2 big screens. Cables running all over heck.

Update fail

Was able to log in using Julie's account. Trying this: https://discussions.apple.com/thread/7376445 I see "mdworker deny(1) file-read-data" errors in /var/log/system.log

This worked:

find /private/var/folders |grep com.apple.LaunchServices | grep csstore > /tmp/foo

Now delete each of those files.

for i in `cat /tmp/foo`; do sudo rm -f $i; done

And reboot. All should now be well. I wonder what those files do and how that guy figured out what to do.

Hardware details

Model Name: MacBook Pro, late 2013 model "A1502".

 Model Identifier:	MacBookPro11,1
 Processor Name:	Intel Core i7
 Processor Speed:	2.8 GHz
 Number of Processors:	1
 Total Number of Cores: 2 (hyperthreaded so shows as 4 in Linux)
 L2 Cache (per Core):	256 KB
 L3 Cache:	        4 MB
 Memory:	        16 GB
 Boot ROM Version:	MBP111.0138.B16
 SMC Version (system):	2.16f68

APPLE SSD SM1024F:

 Capacity:	1 TB (1,000,555,581,440 bytes)
 Model:	APPLE SSD SM1024F                       
 Revision:	UXM6JA1Q
 Serial Number:	S1K6NYAF516200      
 Native Command Queuing:	Yes
 Queue Depth:	32
 Removable Media:	No
 Detachable Drive:	No
 BSD Name:	disk0
 Medium Type:	Solid State
 TRIM Support:	Yes
 Partition Map Type:	GPT (GUID Partition Table)
 S.M.A.R.T. status:	Verified