Pi0w

From Wildsong
Revision as of 18:38, 17 December 2024 by Brian Wilson (talk | contribs) (Created page with "I am experimenting with putting war driving software on this, probably using Horst. Not sure yet how to connect a USB hub. I enabled the serial console this morning and plugged the Pico Debug Module (a very handy device) into the GPIO using a STEMMA cable like this GPIO DBG U port pin 6 GND red pin 8 TX black pin 10 RX white")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

I am experimenting with putting war driving software on this, probably using Horst. Not sure yet how to connect a USB hub.

I enabled the serial console this morning and plugged the Pico Debug Module (a very handy device) into the GPIO using a STEMMA cable like this 

GPIO        DBG U port
pin 6  GND  red
pin 8  TX   black
pin 10 RX   white
Retrieved from "https://wiki.wildsong.biz/index.php?title=Pi0w&oldid=14578"