VOIP
me 275052 steve 754819 dean 257532
I currently use Packet8 service at home, have for a couple years now. It works fine but I am now diving in deeper.
I am also building a system for a small business, which will probably use Linksys equipment.
I am playing with softphones now.
pulver communicator (from fwd site) (Windows)
ekiga (for Linux) could not get it going because the linux box has no mic input! (A Shuttle SB95)
Adore softphone (Windows)
Hardware
PSTN gateway
This is an interesting device because it's open source. You can download the source tarball from the Linksys site.
version 1.0.0.2
It looks like it's based on Monta Vista Hardhat Linux
- MIPS processor
- ?? Flash
- ?? RAM
- Linux 2.4 kernel
- Busybox
- Asterisk PBX software
- thttpd
- /usr/sbin/lightbox controls LED's
- dropbear ssh
Asterisk
You might want to use an IDE/CF adapter that can hold two CF cards. This way you could stick in a smaller second card -say- 32 or 64MB and mount stuff like /etc/asterisk, /var/log, /var/run and voicemail etc on that one, possibly leaving the main card mounted read-only for most of the time.
Setting up
Using Digium cards for FXS/FXO
Zaptel modules genzaptelconf -d Generates /etc/zaptel.conf and /etc/asterisk/zapata-channels.conf files.
