Asterisk debugging

From Wildsong
Revision as of 20:01, 2 November 2015 by Brian Wilson (talk | contribs) (Created page with "This page has tips on what to do when debugging Asterisk problems == One way audio == Typically happens when remote phone and server are NATTED (one end or both) Make sure...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

This page has tips on what to do when debugging Asterisk problems

One way audio

Typically happens when remote phone and server are NATTED (one end or both)

Make sure remote phone is set to nat=? (where ? != no) so that Asterisk ignores the non-routable address in the SIP header and uses the packet source instead.

Asterisk Variable

http://www.voip-info.org/wiki/view/Asterisk+Detailed+Variable+List

MySQL

When using MySQL you can turn on MySQL logging and watch the queries

SIP

When debugging calls you can turn on SIP debugging like this

sip set debug on


CDS Mikrotik router

Rules to enable Vastra (NUC)

add action=dst-nat chain=dstnat comment="Vastra" dst-address=107.135.132.129 dst-port=5060 protocol=udp to-addresses=192.168.2.234 to-ports=5060 add action=dst-nat chain=dstnat comment="Vastra RTP audio stream" dst-address=107.135.132.129 dst-port=10000-19999 protocol=udp to-addresses=192.168.2.234 to-ports=10000-19999


Rules to enable Vastra2

add action=dst-nat chain=dstnat comment="Vastra2 PBX" dst-address=107.135.132.129 dst-port=5060 protocol=udp to-addresses=192.168.2.235 to-ports=5060

add action=dst-nat chain=dstnat comment="Vastra2 RTP audio stream" dst-address=107.135.132.129 dst-port=10000-19999protocol=udp to-addresses=192.168.2.235 to-ports=10000-19999


Rules to MODIFY

set 0 to-addresses=192.168.2.235

Retrieved from "https://wiki.wildsong.biz//index.php?title=Asterisk_debugging&oldid=9311"