|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| related page on Magnia SG20: [[Otter]]
| | #REDIRECT [[Magnia LCD]] |
| | |
| === LCD and Fans ===
| |
| | |
| The 'lcd' program is available in source code form from the SG20 group area on groups.yahoo.com. I compiled it and hacked in settings for the SG20 (it was written for an SG30) and installed it, now I get proper readings on the lcd display and I can control the fans! THANKS Hans-Michael and Eric!
| |
| It uses the lm-sensors and smartmonctl packages.
| |
| | |
| I added a Fahrenheit option to the command line, see /etc/default/lcd
| |
| Source code is in /usr/src/lcd-2.2.1/
| |
| | |
| The '''lm-sensors''' package adds the ability to read the system sensors. The standard Ubuntu 2.6 kernel + lm-sensors will give you output like this:
| |
| | |
| # sensors
| |
| via686a-isa-6000
| |
| Adapter: ISA adapter
| |
| CPU core: +1.76 V (min = +0.06 V, max = +3.10 V)
| |
| +2.5V: +2.48 V (min = +2.36 V, max = +2.61 V)
| |
| I/O: +3.36 V (min = +3.12 V, max = +3.45 V)
| |
| +5V: +5.03 V (min = +4.73 V, max = +5.20 V)
| |
| +12V: +11.59 V (min = +11.35 V, max = +12.48 V)
| |
| CPU Fan: 5720 RPM (min = 0 RPM, div = 2)
| |
| P/S Fan: 5578 RPM (min = 0 RPM, div = 2)
| |
| SYS Temp: +15.6°C (high = +146°C, hyst = +133°C)
| |
| CPU Temp: +16.2°C (high = +146°C, hyst = +133°C)
| |
| SBr Temp: +24.8°C (high = +141°C, hyst = +54°C)
| |
| | |
| The '''smartmontools''' package talks to the hard disk drives, and
| |
| can get the drive temperature if the drive has a sensor. I have two
| |
| drives, the Toshiba drive does not have any sensor but the newer Fujitsu drive does.
| |
| | |
| I added code that will show the current ip addresses.
| |
| | |
| I added code to allow running a firewall script (on and off) from the front panel button, Now that I have switched to using shorewall I will have to change this.
| |
